StratoLauncher IV Deluxe Tilting Water Rocket Launcher + StratoFins Complete Kit

Description

StratoLauncher IV Ultimate Tilting Water Rocket Launcher + StratFins Complete Kit
StratoLauncher® IV Deluxe Tilting Water Rocket Launcher + StratoFins Complete Kit
Description Launcher:
Our new StratoLauncher® IV Deluxe is a significant upgrade with this easy to use powerful compact metal water rocket launcher featuring a 125 PSI safety release valve to prevent exploding bottles while pressurizing, plus a ball head for tilting the launcher. (Safety valve can be swapped out with one that you purchase locally, which has a lower PSI rating if you so desire. This is a standard 1/4" NPT thread.)
StratoLauncher Deluxe screws together in 10 - 15 minutes with easy to follow instructions. View the manual by clicking this link
Deluxe User Manual
(PDF).
This kit includes our Gen 4 StratoLauncher Deluxe + StratoFins® (screw-on water rocket fins), brake lever release system, collapsible water fill funnel, metal hose connector on top, air pressure gauge, and ball head for tilting the launcher.
StratoLauncher IV Deluxe will enable you to propel a 2 liter plastic (PET) soda pop bottle over 350 ft. into the sky using only water and compressed air from a bicycle pump, a foot pump, scuba tank, or an air compressor.
Fuel (water and air) is essentially free and readily available allowing countless launches without additional expense.
StratoLauncher IV Deluxe supports most .5L, 1L, 1.25L, 2L liter plastic (PET) bottles @ air pressures as low as 15 PSI up to 120 PSI.
After pumping up the bottle to the PSI of your choice, you control when the launch occurs by squeezing the black brake lever and releasing the lock at the end of the cable from a safe distance of 10 ft. and out of the splash zone..
No further adjustments are required regardless if you use our StratoFins® or your own homemade rocket or FTC (Fluorescent Tube Cover) rocket thanks to the screw-on nozzle..
Employing a nozzle makes this a universal launcher for most any style water rocket and eliminates problems such as bottles not fitting over a PVC launch tube, O-rings wearing out, or accidental launches due to falling trigger collars.
The restricted nozzle facilitates lift offs that are 3 – 6 times slower (depending on PSI) than typical water rocket launchers enabling you to see the blast off and yet the nozzle rocket will fly equal to or higher in altitude.
Also, the nozzle requires only 1 cup of water per launch for optimum performance although you are free to experiment with greater amounts.
The score mark on the stainless steel tube indicates the optimum water level when the rocket is seated on the StratoLauncher IV Deluxe, but you can exceed this level.
StratoLauncher IV Deluxe ships unassembled with a QR code on the box label that you can scan with your smartphone to view a PDF containing assembly instructions, launch procedures, upgrade kits, videos, and future accessories.
Great item for people of all ages for fun, science projects, school classes, parties, etc. and may well draw a crowd where it is used.
StratoLauncher IV comes in 3 models: Standard, Deluxe, and Ultimate. All of them are fully upgradeable, expandable, and can be accessorized into a complete launching system.
Tools Needed for Assembly:
Adjustable wrench or 14 mm wrench
5 mm hex wrench
4
mm hex wrench
Phillips head screwdriver
Materials and Tools Needed for Launch:
Plastic (PET) soda pop bottle
Top of plastic (PET) soda pop bottle for a nose cone, which is required or the rocket will not fly straight
Water
Air source (bicycle pump, foot pump, scuba tank, or air compressor)
Description Fins:
StratoFins®
will guide your rocket to lofty heights with straight flights instead of tumbling through the air without fins.
StratoFins®
are made of durable plastic and screw-on to a 2 liter soda bottle or smaller.
The StratoFins® kit includes 1 attachment ring and 3 fins along with an instruction sheet that provides information for creating a nose cone and several launching tips.
Assemble StratoFins® by sliding each fin down a separate slot on the attachment ring beginning from the top. With all fins in place screw the attachment ring onto a soda bottle until snug.
This water rocket can be launched with or without a parachute attached since this configuration does not nose dive, but instead tumbles gently back to the ground provided the nose cone is not permanently attached.
Great item for people of all ages for fun, science projects, school classes, parties, etc.
StratoFins®
requires no tools or glue for assembly.
You will need to supply:
2 Plastic (PET) soda pop bottles (1 for rocket and 1 for nose cone)
Measurements:
Launcher
Width: 7"
Length: 8"
Height (assembled): 11 3/4"
Weight: 2 lbs. 6 oz.
Fins
Width: 3.5"
Height: 5.5"
Thickness: 1/4"
Weight: 1 oz.
Condition:
StratoLauncher® IV Deluxe water rocket launcher kit is new and ships unassembled. StratoFins® are new and ship unassembled. Water rocket (2 liter bottle), parachute and nose cone are NOT included with this kit. Operate launcher with extreme care and only under adult supervision. Relationshipware LLC and its members are NOT RESPONSIBLE for any injury or loss of property to any person suffered while operating our StratoLauncher® IV Deluxe water rocket launcher with or without our StratoFins®.
Shipping:
Buyer pays
actual shipping charges
. Quantity purchases that fit into a single box will result in discounted shipping  costs, but allow us to send you an invoice before paying for your items.
Payment:
We accept PayPal. Payment is due within 3 days upon close of sale. If you have any further questions please e-mail us before purchasing.
StratoLauncher® IV Deluxe Water Rocket Kit- YouTube
Video will open in a new window
[isdntekvideo]
StratoLauncher® IV Deluxe Assembly Instructions - YouTube
Video will open in a new window
[isdntekvideo]
How to Prevent Nose Diving Your Water Rocket - YouTube
Video will open in a new window
[isdntekvideo]
StratoLauncher IV Deluxe Launch Procedure - YouTube
Video will open in a new window
[isdntekvideo]
Check out the various water rocket bundles:
StratoFins® Screw-on Water Rocket Fins
http://www.ebay.com/itm/111594075970
StratoFins® Screw-on Water Rocket Fins + Parachute Kit
http://www.ebay.com/itm/111594076513
StratoLauncher® IV Water Rocket Launcher + StratoFins Kit
http://www.ebay.com/itm/122887747141
StratoLauncher® IV Ultimate Tilting Water Rocket Launcher + StratoFins Complete Kit
http://www.ebay.com/itm/112480844556
Fins and parachute make all the difference in the world in performance and fun when using a water rocket launcher. You will be amazed how high only 40 PSI will propel a bottle with fins attached to it, which is only 1/3 the pressure that you could employ.
Pay instantly and securely with your Visa, MasterCard, Discover, or American Express card through PayPal!